 |
| |
 |
| Sculptures |
| Baby Autumn and Mr.Toad |
With base: 18" tall, 18" long, and 14" deep.
Baby: 9" tall, 12" long, and 11" deep
Mr. Toad: 3" tall, 4" wide, and 4" deep
Base is styrofoam covered in Celluclay (a type of paper mache)
Silk-like leaves, natural mosses, and natural tumbled stone.
The rocks, are sculpted out of aluminum foil covered in more
Celluclay. The Mushrooms are made out of white Sculpey
Original polymer clay, painted with Acrylic paint, and then
glazed with Sculpey Gloss. The jems are acrylic.
Baby: 9" tall, 12" long, and 11" deep
Mr. Toad: 3" tall, 4" wide, and 4" deep
Base is styrofoam covered in Celluclay (a type of paper mache)
Silk-like leaves, natural mosses, and natural tumbled stone.
The rocks, are sculpted out of aluminum foil covered in more
Celluclay. The Mushrooms are made out of white Sculpey
Original polymer clay, painted with Acrylic paint, and then
glazed with Sculpey Gloss. The jems are acrylic.
The figures are all on soldered wire, and then bulked out
with aluminum foil.
Baby is then covered with a thin layer of black Sculpey
Premo polymer clay, to cover the armature, then it is
baked at the manufacturers specs. Once that is cooled,
I then start to fill out the figure applying the clay like
musculature. (knowledge of anatomy is always helpful)
Once I have completed that stage, it gets baked again.
The wings are made using Fantasy Film (a type of heat
fusible foil) I used a little Tacky Glue to secure the film
to the wings temporarily while I work on the figure
before baking again. I then paint on a thin coating of
Fimo Gel to strengthen the wing membrane (fantasy film).
Before I bake, I add pigment powder to the black
polymer clay, for coloring, and add other details such as
texture, set crystals, eyes,etc. It then gets baked
again. Once this is done, all that is left to do is add any
other type of details Like painting with acrylic, or
scratching out more textures. Lastly I seal the figure
with Sculpey Satin finish.
Mr. Toad is done pretty much the same way, except he
was sculpted out of white Sculpey Original, and painted
with metallic, and pearl Acrylic paint.
with aluminum foil.
Baby is then covered with a thin layer of black Sculpey
Premo polymer clay, to cover the armature, then it is
baked at the manufacturers specs. Once that is cooled,
I then start to fill out the figure applying the clay like
musculature. (knowledge of anatomy is always helpful)
Once I have completed that stage, it gets baked again.
The wings are made using Fantasy Film (a type of heat
fusible foil) I used a little Tacky Glue to secure the film
to the wings temporarily while I work on the figure
before baking again. I then paint on a thin coating of
Fimo Gel to strengthen the wing membrane (fantasy film).
Before I bake, I add pigment powder to the black
polymer clay, for coloring, and add other details such as
texture, set crystals, eyes,etc. It then gets baked
again. Once this is done, all that is left to do is add any
other type of details Like painting with acrylic, or
scratching out more textures. Lastly I seal the figure
with Sculpey Satin finish.
Mr. Toad is done pretty much the same way, except he
was sculpted out of white Sculpey Original, and painted
with metallic, and pearl Acrylic paint.
This is Autumns
Heart-Stone. I
gifted it to her
when She was
created. It is
Swarovski Volcano.
It is what inspired
her coloring.
Heart-Stone. I
gifted it to her
when She was
created. It is
Swarovski Volcano.
It is what inspired
her coloring.
She is a little
crazy like her
momma. Just look
at all her baubles
she has collected in
her nest! Mr.
Toad doesn't seem
to mind.
crazy like her
momma. Just look
at all her baubles
she has collected in
her nest! Mr.
Toad doesn't seem
to mind.
This is her
"Nite-Lite"
(battery
operated LED
Tea-light)...Just
like all little
ones, she is
afraid of the
dark.
"Nite-Lite"
(battery
operated LED
Tea-light)...Just
like all little
ones, she is
afraid of the
dark.
The base before
painting. I placed
everything where it
should be before
the Celluclay sets up
(makes it easier to
find where to glue
later on)
painting. I placed
everything where it
should be before
the Celluclay sets up
(makes it easier to
find where to glue
later on)
Eyes are made by
me!...From scratch!
me!...From scratch!
The crystals are
all Swarovski:
Fire Opal,
Volcano, and
Green Turmaline.
all Swarovski:
Fire Opal,
Volcano, and
Green Turmaline.
I used masking
tape to help
secure the
aluminum foil
around the
soldered wires.
tape to help
secure the
aluminum foil
around the
soldered wires.
Yep! This piece is for
sale, If you can afford
it! I banked at least
100 hours under the
Dreaming Tree
breathing life into this
baby and her best
buddy...$900.00
+$40.00 shipping. I am
currently searching for
a nice enough base to
foundation this sculpture.
sale, If you can afford
it! I banked at least
100 hours under the
Dreaming Tree
breathing life into this
baby and her best
buddy...$900.00
+$40.00 shipping. I am
currently searching for
a nice enough base to
foundation this sculpture.
I am a
member
of the
O.O.A.K.
Guild.
member
of the
O.O.A.K.
Guild.
 |
 |
 |